Provides a 50mm air gap clearence to a penetrated floor or ceiling and is only used where S-Flue penetrates a non-combustible floor, and/or services a gas or oil fired appliance where the flue gas temperature does not exceed 250°C.
For use on solid fuel and gas/oil appliances. eg: wood burning stoves, multi fuel stoves, gas coal effect fires, oil boilers etc.
The outer skin is made from 304 grade stainless steel and is 0.4mm thick. The inner skin is made from 316 grade stainless steel and is 0.4mm thick. The insulation is compressed rockwool giving a density of 230kg/m3. The insulation is encapsulated within the twist-lock couplers. All parts are fully laser welded. The distance required from the outer skin to combustible materials (e.g. wood, plaster board) is 50mm.
Approvals & Warranty
EN1856-1 T450 N1 D V2 L50040 G(50)
S-Flue is guaranteed for 15 years (subject to conditions)
S-Flue twin wall insulated chimney parts are secured together by twisting two pieces together until they lock, then secure using the provided locking band. Make sure that you keep a distance of 50mm from the outside of the flue to any combustible material (wood, plaster board).