A roof brace kit can be used whenever there is a need to stabilise the chimney above the roof level. The roof brace kit must be used if the chimney extends 1.5+ metres above the roof. The arms can be adjusted from 1.5 metres to 2.9 metres in length.
Application
For use on solid fuel and gas/oil appliances. eg: wood burninig stoves, multi fuel stoves gas coal effect fires, oil and gas boiler and any solid fuel appliances.
Construction
Outer skin is made from 304 grade stainless steel and is 0.4mm thick. Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m3. All parts are fully welded. Distance to combustibles is 50mm.
Approvals
KW is HETAS Approved and is CE marked.
Designation Number
EN1856-1 T600 N1 W V2 L50040 G50.
EN1856-1 T200 W V2 L50040 O20.
Installation
KW twin wall insulated chimney parts are secured together by using a locking band. Make sure that you keep a distance of 50mm from the outside of the flue to any combustible material (wood, plaster board).
Branding
KW is sold under separate brand names in the UK. Components may be branded as KW, KC or TW Pro.
