The square finishing plate comes in two parts and is used to tidy the area around the flue as it passes through a non-combustible wall. This plate is attached to the wall where the flue is passing through between 0° and 30°. Use silicone and screws to secure against the wall.
Application
For use on solid fuel and gas/oil appliances. eg: wood burning stoves, multi fuel stoves, gas coal effect fires, oil boiler and gas and any solid fuel appliances.
Construction
Outer skin is made from 304 grade stainless steel and is 0.4mm thick. Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 128kg/m3. All parts are fully welded. Distance to combustibles is 60mm.
Approvals
KC is HETAS Approved and is CE marked.
Designation Number
EN1856-1 T600 N1 W V2 L50040 G60
EN1856-1 T200 P1 W V2 L50040 O20
Installation
KC twin wall insulated chimney parts are secured together by using a locking band. Make sure that you keep a distance of 60mm from the outside of the flue to any combustible material (wood, plaster board).