The exodraft chimney fan type RS are exhaust fans that are designed so that the smoke discharges sideways (horizontal).
Well suited for solid fuels
The chimney fan can be used for all types of fuels but is particularly suitable for solid fuel boilers, fireplaces and stoves. The axial impeller is made of stainless steel, which makes it easy for chimney sweeps to remove soot and deposits. As the chimney fan is mounted on top of the chimney, a vacuum is created in the flue pipe and the chimney. The chimney fan is part of an exodraft system and must be connected to an exodraft control.
exodraft RS chimney fans are designed so that they are suitable for continuous use at temperatures up to 250°C. The chimney fan is made of cast aluminium; all screws and bolts are made of stainless steel. The engine is an enclosed heat-resistant asynchronous motor with permanently lubricated ball bearings, which is protected from the flue gas. A special cooling vane wheel and cooling air slots safely ensure continuous cooling of the motor. The cable is heat resistant and strain relieved and protected by a reinforced hose casing. All of these combined give the chimney fan high operational reliability and a long service life. The chimney fan can be opened so that a chimney sweeper can easily clean the chimney. In the discharge opening, a stainless safety mesh is mounted to protect fingers and birds.
Different models for masonry and steel chimneys
The models RS009-016 are supplied in two different versions: Square mounting plate for brick chimneys and octagonal mounting plate for steel chimneys.
Voltage:- 1 x 230 V
Ampere:- 1.2 A